Influência do tratamento térmico a seco pós-cura nas propriedades mecânicas e ópticas de resinas acrílicas ativadas quimicamente e resinas bisacrílicas / Post-cure heat treatments influence on mechanical and optical properties of acrylic and bis-acryl materials

Este estudo tem por objetivo avaliar a influência do tratamento térmico (TT) a seco pós-cura sobre as propriedades mecânicas e ópticas de resinas acrílicas ativadas quimicamente (Dencôr e Duralay) e resinas bisacrílicas (Protemp 4 e Primma Art). Os corpos de prova (cps) foram confeccionados nas dimensões de 12mm de diâmetro e 1mm de espessura em matriz de poliacetal. Após a confecção, as resinas foram divididas em grupos experimentais onde receberam TT, pelo período de 10 minutos, 70 C (TT70), a 100 C (TT100) ou a 130 C (TT130) e as pertencentes ao grupo controle foram mantidas a 24 C (CTL) pelo mesmo período. A diferença de cor (CIEDE2000 - E00) e o parâmetro de translucidez (PT) foram avaliados utilizando um espectrofotômetro. A resistência ao manchamento após imersão em água, vinho tinto e café durante 30 dias também foi avaliada por meio da E00. A avaliação de microdureza Knoop (KHN) foi realizada no microdurômetro e a análise da resistência à flexão biaxial (RFB) teve o auxílio da máquina de ensaio universal pelo método pistão sobre três esferas. O TT não teve influência sobre a RFB. O grupo TT130 produziu valores de KHN maiores que os demais grupos. Todos os TT acarretaram um aumento significativo no E00, com exceção do grupo TT70 da Dencôr e da Protemp. O TT na Dencôr resultou em aumento do PT, e para a Duralay e Protemp, uma redução do PT em TT100 e TT130. No geral, as resinas acrílicas apresentaram um aumento da estabilidade de cor ao serem submetidas ao TT. Para as resinas bisacrílicas, o TT não influenciou a resistência ao manchamento. O presente trabalho concluiu que os TTs produziram aumento na KHN (TT130) e não influenciaram a RFB. O TT e a imersão em corantes levaram a uma maior diferença de cor, todavia dentro do limite de aceitabilidade. Houve aumento pontual da resistência ao manchamento das resinas.

Providing inoculum for Didymella bryoniae studies: the effect of light spectrum and storing at low temperature / Fornecendo inóculo para estudos de Didymella bryoniae: o efeito do espectro de luz e armazenamento em baixa temperatura

Abstract The in vitro sporulation of Didymella bryoniae is of great importance for studies that require pure inoculum and in large quantities. Thus, the objectives of this study were to identify the best condition for D. bryoniae sporulation combining different light spectra (UV-A or UV-B light, white light, and continuous dark), with distinct culture media (PDA, V8, ML, and PDAB) and, to evaluate fungus' survivability stored at -20°C over time. The fungus samples were only able to sporulate when subjected to the UV-B light treatment, regardless of the culture medium. The highest appearance of spores conidium type was observed in the PDAB medium, and the lowest production occurred in the ML medium. Reproductive structures, such as perithecia and pycnidia, were observed in all culture media. However, there was considerable variation in the amount of each structure between the different culture media. The ML and V8 media showed a greater number of perithecia and the PDA and PDAB media presented a greater proportion of pycnidia compared to perithecia. The storage duration at -20°C did not affect mycelial growth or mycelial growth rate. In conclusion, the UV-B light is essential for D. bryoniae in vitro sporulation. Moreover, the culture medium composition influences the type of fungal structure produced, as well as spores' size and quantity. Freezing at -20°C is an efficient technique that can be used to store D. bryoniae for at least five months without loss of viability.

Resumo A esporulação de Didymella bryoniae in vitro é de grande importância para estudos que requerem inóculo puro e em grandes quantidades. Assim, os objetivos deste estudo foram identificar a melhor condição para esporulação de D. bryoniae combinando diferentes espectros de luz (luz UV-A ou UV-B, luz branca e escuro contínuo) com distintos meios de cultura (PDA, V8, ML e PDAB) e, avaliar a sobrevivência do fungo armazenado a -20°C ao longo do tempo. As amostras de fungo só esporularam quando submetidas ao tratamento com luz UV-B, independentemente do meio de cultura. Maior aparecimento de esporos do tipo conídio foi observado no meio PDAB, e a menor produção ocorreu no meio ML. Estruturas reprodutivas, como peritécios e picnídeos, foram observadas em todos os meios de cultura. No entanto, houve uma variação considerável na quantidade de cada estrutura entre os diferentes meios de cultura. Os meios ML e V8 apresentaram maior número de peritécios e os meios PDA e PDAB apresentaram maior proporção de picnídeos em relação aos peritécios. A duração do armazenamento a -20°C não afetou o crescimento micelial ou a taxa de crescimento micelial. Em conclusão, a luz UV-B é essencial para a esporulação de D. bryoniae in vitro. Além disso, a composição do meio de cultura influencia o tipo de estrutura fúngica produzida, bem como o tamanho e a quantidade dos esporos. O congelamento a -20°C é uma técnica eficiente que pode ser usada para armazenar D. bryoniae por pelo menos cinco meses sem perda de viabilidade

Influence of incubation temperature and embryonic motility on the growth of members of Caiman yacare (Daudin, 1802) / Influência da temperatura de incubação e da motilidade embrionária sobre o crescimento dos membros de Caiman yacare (Daudin, 1802)

Abstract This study aimed to evaluate whether skeletal development of the Pantanal Caiman (Caiman yacare) is similarly influenced by temperature variation and controlled increases in embryo motility. All eggs were incubated at 90% humidity and 29 °C for the first 45 days. Thereafter, the incubation temperature was either maintained at 29 °C and embryos were treated with 4-aminopyridine (4-AP) on days 46, 47, 48, and 49 (Group I, 29 °C 4-AP, n = 15); maintained at 29 °C (n = 14; Group II); or at 33 °C (n = 14, Group III). Embryonic movement was measured using an Egg Buddy® digital monitor on days 30, 35, 42, 49, 56, and 60, at which point embryos were euthanized and samples were collected for analysis. No differences were observed between groups with varying incubation temperatures. In contrast, embryonic motility was greater in embryos treated with 4-AP (P < 0.001) on day 49, and this was associated with higher proportions of snout-vent and hand lengths. This study demonstrates for the first time that pharmacologically induced increases in embryo motility result in phenotypic changes to the proportion of elements during prenatal ontogeny, thereby effectively altering the adaptation of the species to specific environments.

Resumo Este estudo objetivou avaliar os efeitos da temperatura e motilidade embrionária sobre o desenvolvimento esquelético de jacaré-do-pantanal (Caiman yacare). Os ovos foram incubados com 90% de umidade e empregou-se a temperatura de 29°C por 45 dias. Após, para a incubação do Grupo I a temperatura continuou em 29°C, mas associou-se à injeção de 4-aminopiridina (29°C-4AP, n = 15) aplicada nos dias 46, 47, 48 e 49, do Grupo II permaneceu em 29°C (n = 14) e do Grupo III elevou-se para 33°C (n = 14). A movimentação foi mensurada através do monitor digital Egg Buddy® nos dias 30, 35, 42, 49, 56 e 60 dias. Aos 60 dias, os embriões foram eutanasiados e coletadas amostras embrionárias. Na análise estatística não foram observadas diferenças entre os grupos para o fator temperatura sobre a motilidade embrionária no desenvolvimento esquelético. Em contraste, a motilidade evidenciou diferença estatística no dia 49 para o Grupo I (P < 0,001) e apresentou maiores proporções de nariz e mão. Esses dados demonstraram pela primeira vez que o aumento na motilidade, induzidos farmacologicamente resultam em divergências fenotípicas na proporção de segmentos anatômicos durante a ontogenia pré-natal, podendo alterar efetivamente a adaptação dos animais em ambientes específicos.

A disease predictive model based on epidemiological factors for the management of bacterial leaf blight of rice / Um modelo preditivo de doenças baseado em fatores epidemiológicos para o manejo da queima bacteriana das folhas do arroz

Rice is a widely consumed staple food for a large part of the world's human population. Approximately 90% of the world's rice is grown in Asian continent and constitutes a staple food for 2.7 billion people worldwide. Bacterial leaf blight (BLB) caused by Xanthomonas oryzae pv. oryzae is one of the devastating diseases of rice. A field experiment was conducted during the year 2016 and 2017 to investigate the influence of different meteorological parameters on BLB development as well as the computation of a predictive model to forecast the disease well ahead of its appearance in the field. The seasonal dataset of disease incidence and environmental factors was used to assess five rice varieties/ cultivars (Basmati-2000, KSK-434, KSK-133, Super Basmati, and IRRI-9). The accumulated effect of two year environmental data; maximum and minimum temperature, relative humidity, wind speed, and rainfall, was studied and correlated with disease incidence. Average temperature (maximum & minimum) showed a negative significant correlation with BLB disease and all other variables; relative humidity, rainfall, and wind speed had a positive correlation with BLB disease development on individual varieties. Stepwise regression analysis was performed to indicate potentially useful predictor variables and to rule out incompetent parameters. Environmental data from the growing seasons of July to October 2016 and 2017 revealed that, with the exception of the lowest temperature, all environmental factors contributed to disease development throughout the cropping season. A disease prediction multiple regression model was developed based on two-year data (Y = 214.3-3.691 Max T-0.508 Min T + 0.767 RH + 2.521 RF + 5.740 WS), which explained 95% variability. This disease prediction model will not only help farmers in early detection and timely management of bacterial leaf blight disease of rice but may also help reduce input costs and improve product quality and quantity. The model will be both farmer and environmentally friendly.

O arroz é um alimento básico amplamente consumido por grande parte da população humana mundial. Aproximadamente 90% do arroz do mundo é cultivado no continente asiático e constitui um alimento básico para 2,7 bilhões de pessoas em todo o mundo. O crestamento bacteriano das folhas (BLB) causado por Xanthomonas oryzae pv. oryzae é uma das doenças devastadoras do arroz. Um experimento de campo foi realizado durante os anos de 2016 e 2017 para investigar a influência de diferentes parâmetros meteorológicos no desenvolvimento do BLB, bem como o cálculo de um modelo preditivo para prever a doença bem antes de seu aparecimento em campo. O conjunto de dados sazonais de incidência de doenças e fatores ambientais foi usado para avaliar cinco variedades/cultivares de arroz (Basmati-2000, KSK-434, KSK-133, Super Basmati e IRRI-9). O efeito acumulado de dados ambientais de dois anos; temperatura máxima e mínima, umidade relativa do ar, velocidade do vento e precipitação pluviométrica foram estudados e correlacionados com a incidência da doença. A temperatura média (máxima e mínima) apresentou correlação significativa negativa com a doença BLB e todas as outras variáveis; umidade relativa, precipitação e velocidade do vento tiveram uma correlação positiva com o desenvolvimento da doença BLB em variedades individuais. A análise de regressão stepwise foi realizada para indicar variáveis preditoras potencialmente úteis e para descartar parâmetros incompetentes. Os dados ambientais das safras de julho a outubro de 2016 e 2017 revelaram que, com exceção da temperatura mais baixa, todos os fatores ambientais contribuíram para o desenvolvimento da doença ao longo da safra. Um modelo de regressão múltipla de previsão de doença foi desenvolvido com base em dados de dois anos (Y = 214,3-3,691 Max T-0,508 Min T + 0,767 RH + 2,521 RF + 5,740 WS), que explicou 95% de variabilidade. Este modelo de previsão de doenças não só ajudará os agricultores na detecção precoce e gestão atempada da doença bacteriana das folhas do arroz, mas também pode ajudar a reduzir os custos de insumos e melhorar a qualidade e a quantidade do produto. O modelo será agricultor e ambientalmente amigável.

First Experience of Plastination at 4150 Meters Above Sea Level, at the Altitude of La Paz, Bolivia / Primera Experiencia de Plastinación a 4150 Metros sobre el Nivel del Mar, en la Altura de La Paz, Bolivia

SUMMARY: Despite attempts to develop the plastination technique in Bolivia, standardized results have not yet been achieved that could be communicated via scientific publications. There is a great deal of misunderstanding around the technique, confusing it with classic techniques of inclusion in different types of resin, such as polyester and epoxy, but these protocols are not plastination. The aim of this work was to communicate the first standardized room-temperature plastination protocol with silicone in Bolivia, with the unique feature of doing so at the altitude of the city of La Paz, thus constituting the first communication of a plastination technique at 4,150 m.a.s.l. sub sede La Paz, La Paz, Bolivia.

En Bolivia, a pesar de los intentos en el desarrollo de la técnica de Plastinación, aún no se han alcanzado resultados estandarizados que pudieran ser comunicados por medio de publicaciones científicas. Existe una gran confusión al momento de desarrollar la técnica, confundiéndola con técnicas clásicas de inclusión en distintos tipos de reina, como poliéster y epoxy, pero no correspondiendo estos protocolos desarrollados a la técnica de plastinación. En este sentido, el objetivo de esta trabajo consistió en comunicar el primer protocolo estandarizado de plastinación a temperatura ambiente con silicona de Bolivia, con la particularidad de desarrollarlo en la altura de la ciudad de La Paz, constituyéndose, de esta manera, en la primera comunicación de una técnica de plastinación a 4.150 metros sobre el nivel del mar.

Analysis of drying kinetic of brewer ́s spent grains: effect of the temperature on the physical properties and the content of bioactive compounds / Análisis de la cinética de secado del bagazo residual de malta: efecto de la temperatura sobre las propiedades físicas y el contenido de compuestos bioactivos

Background: Brewer ́s spent grain (BSG) is a biomass by-product generated in large volumes during industrial beer production. BSG has become a growing environmental problem, as most breweries discard it inappropriately, negatively impacting the environment. Alternatives for the exploitation of this by-product have consisted of elaborating food supplements for farm animals, obtaining biofuels, developing adsorbents, and obtaining substances for the food industry. However, the high moisture content in BSG (approximately 70%), poses a significant challenge in exploring various reuse alternatives. Therefore, the implementation of a pre-drying process becomes essential. Objective: This study aimed to analyze the BSG drying kinetics at different temperatures and the effect of the drying temperature on the physical properties and the content of bioactive compounds. Methods: BSG samples were dried at different temperatures (50, 60, 70, 80, 90, and 105°C) and analyzed for their moisture ratio, water activity, total polyphenol content (TPC), and DPPH (1,1-diphenyl-2-picrylhydrazil) radical scavenging activity. Also, four kinetics models were fitted to the drying data. Results:It was determined that the effective diffusivity was between 5.23x10

Antecedentes: El Bagazo residual de malta (BSG por sus siglas en inglés) es un subproducto biomásico generado en grandes volúmenes durante la producción industrial de cerveza. El BSG se ha convertido en un creciente problema para el medio ambiente, debido a que la mayoría de las cervecerías descartan inapropiadamente este residuo generando un impacto negativo al ambiente. Las alternativas para el aprovechamiento de este subproducto han consistido especialmente en la elaboración de suplementos alimenticios para animales de granja, obtención de biocombustibles, desarrollo de adsorbentes y obtención de productos para la industria alimentaria. Sin embargo, el alto contenido de humedad (~70%) del BSG representa un reto para el desarrollo de diferentes alternativas de reutilización, por lo que se hace necesario un proceso de secado previo. Objetivos: En este estudio se analizó la cinética de secado del BSG a diferentes temperaturas y el efecto de la temperatura de secado sobre sus propiedades físicas y contenido de compuestos bioactivos. Métodos: Las muestras de BSG fueron secadas a diferentes temperaturas (50, 60, 70, 80, 90 y 105°C) y analizadas en términos de razón de humedad, actividad acuosa, contenido de polifenoles totales (TPC) y actividad secuestradora del radical DPPH. Además, se ajustaron 4 modelos cinéticos a los datos de secado. Resultados: Se determinó que la difusividad efectiva del BSG varió entre 5.23x10

Effect of diurnal temperature range on the number of elderly inpatients with ischemic stroke in Hunan Province / 中华预防医学杂志

Objective: To study the effect of diurnal temperature range on the number of elderly inpatients with ischemic stroke in Hunan Province. Method: Demographic and disease data, meteorological data, air quality data, population, economic and health resource data of elderly inpatients with ischemic stroke were collected in 122 districts/counties of Hunan Province from January to December 2019. The relationships between the diurnal temperature range and the number of elderly inpatients with ischemic stroke were analyzed by using the distributed lag non-linear model, including the cumulative lag effect of the diurnal temperature range in different seasons, extremely high diurnal temperature range and extremely low diurnal temperature range. Results: In 2019, 152 875 person-times were admitted to the hospital for ischemic stroke in the elderly in Hunan Province. There was a non-linear relationship between the diurnal temperature range and the number of elderly patients with ischemic stroke, with different lag periods. In spring and winter, with the decrease in diurnal temperature range, the risk of admission of elderly patients with ischemic stroke increased (Ptrend<0.001, Ptrend=0.002);in summer, with the increase in diurnal temperature range, the risk of admission of elderly patients with ischemic stroke increased (Ptrend=0.024);in autumn, the change in the diurnal temperature range would not cause a change in admission risk (Ptrend=0.089). Except that the lag effect of the extremely low diurnal temperature range in autumn was not obvious, the lag effect occurred in other seasons under extremely low and extremely high diurnal temperature ranges. Conclusion: The high diurnal temperature range in summer and the low diurnal temperature range in spring and winter will increase the risk of admission of elderly patients with ischemic stroke, and the risk of admission of elderly patients with ischemic stroke will lag under the extremely low and extremely high diurnal temperature ranges in the above three seasons.

Analysis of the burden of disease attributable to high temperature exposure in China and globally from 1990 to 2019 / 中华劳动卫生职业病杂志

Objective: To analyze the burden of disease attributable to high temperature exposure in China and globally from 1990 to 2019, and to study the current burden of disease in relevant populations. Methods: In October 2021, based on data from the global burden of disease 2019 (GBD 2019) study, population attributable fraction (PAF), number of deaths, mortality, disability-adjusted life year (DALY) and DALY rate of Chinese and global populations with different ages and genders in 1990 and 2019 were extracted and analyzed. The rate of change was calculated, the mortality rate was normalized by the age structure of the world standard population, and the causes of disease burden caused by high temperature exposure of Chinese residents were analyzed. Results: In 2019, compared with 1990, the PAF of Chinese and global population decreased by 43.98% and 12.41% respectively, the number of deaths increased by 29.55% and 49.40% respectively, the crude mortality rate increased by 7.81% and 3.30% respectively, the DALY decreased by 48.12% and 14.41% respectively, and the DALY rate decreased by 56.82% and 40.82% respectively. The mortality rate of the ≥70 age group was higher than that of other groups. The disease burden indicators such as PAF, standardized mortality and DALY attributable to high temperature exposure in men were higher than those in women. In 2019, the main cause of DALY affected by high temperature exposure in Chinese population was ischemic heart disease (84400 person-years), and the main cause of death was ischemic heart disease (4900 cases). Conclusion: The burden of diseases attributable to high temperature exposure is still serious in China and the world at large. Targeted interventions should be formulated for men, the elderly and people with occupational exposure, and a sound surveillance system should be established to reduce the burden of diseases caused by high temperature exposure.

Evaluation of thermal environment and human thermal comfort in 8 types of public places from 2019 to 2021 / 中华劳动卫生职业病杂志

Objective: To evaluate the thermal environment of different types of public places and the thermal comfort of employees, so as to provide scientific basis for the establishment of microclimate standards and health supervision requirements. Methods: From June 2019 to December 2021, 50 public places (178 times) of 8 categories in Wuxi were selected, including hotels, swimming pools (gymnasiums), bathing places, shopping malls (supermarkets), barber shops, beauty shops, waiting rooms (bus station) and gyms. In summer and winter, microclimate indicators such as temperature and wind speed were measured in all kinds of places, combined with the work attire and physical activity of employees in the places. Fanger thermal comfort equation and center for the built environment (CBE) thermal comfort calculation tool were used to evaluate the predicted mean vote (PMV), predicted percent dissatisfied (PPD) and standard effective temperature (SET) according to the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 55-2020. The modification effects of seasonal and temperature control conditions on thermal comfort were analyzed. The consistency of GB 37488-2019 "Hygienic Indicators and Limits in Public Places" and ASHRAE 55-2020 evaluation results on thermal environment was compared. Results: The thermal sensation of hotel, barber shop staff and the gym front-desk staff were moderate, while the thermal sensation of swimming place lifeguard, bathing place cleaning staff and gym trainer were slightly warm in summer and winter. Waiting room (bus station) cleaning and working staff, shopping mall staff felt slightly warm in summer and moderate in winter. Service staff in bathing places felt slightly warm in winter, while staff in beauty salons felt slightly cool in winter. The thermal comfort compliance of hotel cleaning staff and shopping mall staff in summer was lower than that in winter (χ(2)=7.01, 7.22, P=0.008, 0.007). The thermal comfort compliance of shopping mall staff in the condition of air conditioning off was higher than that in the condition of air conditioning on (χ(2)=7.01, P=0.008). The SET values of front-desk staff in hotels with different health supervision levels were significantly different (F=3.30, P=0.024). The PPD value and SET value of the front-desk staff, and the PPD value of cleaning staff of hotels above three stars were lower than those of hotels below three stars (P<0.05). The thermal comfort compliance of front-desk staff and cleaning staff in hotels above three stars was higher than that in hotels below three stars (χ(2)=8.33, 8.09, P=0.016, 0.018). The consistency of the two criteria was highest among waiting room (bus station) staff (100.0%, 1/1) and lowest among gym front-desk staff (0%, 0/2) and waiting room (bus station) cleaning staff (0%, 0/1) . Conclusion: There are different degrees of thermal discomfort in different seasons, under the condition of air conditioning and health supervision, and the microclimate indicators can not fully reflect the thermal comfort of human body. The health supervision of microclimate should be strengthened, the applicability of health standard limit value should be evaluated in many aspects, and the thermal comfort of occupational group should be improved.

Identification and biological characteristics of violet root rot pathogen of Pseudostellaria heterophylla in Fujian province / 中国中药杂志

Violet root rot is one of the main root diseases in the production process of Pseudostellaria heterophylla. To clarify the pathogenic species that cause the violet root rot of P. heterophylla in Fujian province, the roots and the sclerotia with violet root rot symptoms were collected from the main producing areas of P. heterophylla(Fujian province) from 2017 to 2021, and the pathogens were isolated by tissue separation method and identified by morphology and multi-gene phylogenetic analysis. Additionally, the biological characteristics of the pathogens were studied and the fungicides were determined. The results showed that 78 strains of violet root rot were isolated from the collected root samples, which belonged to one type after preliminary morphological identification. Two represen-tative strains were selected from the pathogens for multi-gene phylogenetic analysis, and they were clustered with Helicobasidium mompa together. The suitable culture conditions for the mycelium were OA medium, 25 ℃, pH 6, and ammonium oxalate as the nitrogen source. The lethal temperature of the mycelium was 50 ℃ for 10 minutes. Moreover, 99.1% propiconazole and 98.7% azoxystrobin had the optimal bacteriostatic effect, and the concentrations with the 50% bacteriostatic rate were 16.85 and 12.24 μg·mL~(-1), respectively. On the basis of the above results, the pathogen causing violet root rot of P. heterophylla in Fujian province was H. mompa. The medium type, growth temperature, pH value, nitrogen source, etc. had significant effect on the growth of mycelium.

Effects of temperature and humidity on infection of Fusarium oxysporum in seedlings of Salvia miltiorrhiza / 中国中药杂志

Wilt disease is a major disease of cultivated Salvia miltiorrhiza, which is caused by Fusarium oxysporum. Since the infection process of F. oxysporum in plants is affected by environment factors, this study was conducted to reveal the relationship between disease severity and concentration of the pathogen in plants in the infection process of F. oxysporum in seedlings of S. miltiorrhiza by pot experiments and to reveal the effects of temperature and humidity on the infection process. The results showed that, after inoculation of S. miltiorrhiza seedlings with F. oxysporum, the pathogen in different parts was detected at different time, and it was first detected in substrates. With the continuous propagation of the pathogen(4-5 d), it gradually infected the roots and stems of the seedlings, and the plants had yellowing leaves and withering. The number of the pathogen reached the maximum in each part after 7-8 d, and then gradually decreased in the later stage of the disease. The concentration of the pathogen in substrates, roots and stems of S. miltiorrhiza showed a trend of decreasing after increasing with the aggravation of the disease and reached the maximum in the samples of moderate morbidity, while the concentration in the samples of severe morbidity decreased. In addition, the infection of F. oxysporum in seedlings of S. miltiorrhiza was affected by temperature and humidity. The suitable temperature was 25-30 ℃ and the suitable humidity was 80%-90%. This study could provide guidance for the experiments on pathogenicity of F. oxysporum, screening of biocontrol bacteria and controlling of wilt.

Global Burden of Cardiovascular Disease Attributable to High Temperature in 204 Countries and Territories from 1990 to 2019 / 生物医学与环境科学（英文）

OBJECTIVE@#This study aimed to estimate spatiotemporal variations of global heat-related cardiovascular disease (CVD) burden from 1990 to 2019.@*METHODS@#Data on the burden of heat-related CVD were derived from the Global Burden of Disease Study 2019. Deaths and disability-adjusted life years (DALYs) were used to quantify heat-induced CVD burden. We calculated the age-standardized mortality rate (ASMR) and DALY rate (ASDR) per 100,000 population to compare this burden across regions. Generalized linear models were applied to evaluate estimated annual percentage changes (EAPC) for temporal trends from 1990 to 2019. The correlation between the socio-demographic index (SDI) and age-standardized rate was measured using the Spearman rank test.@*RESULTS@#Heat-induced CVD caused approximately 90 thousand deaths worldwide in 2019. Global ASMR and ASDR of heat-related CVD in 2019 were 1.17 [95% confidence interval ( CI): 0.13-1.98] and 25.59 (95% CI: 2.07-44.17) per 100,000 population, respectively. The burden was significantly increased in middle and low-SDI regions and slightly decreased in high-SDI regions from 1990 to 2019. ASMR showed an upward trend, with the most considerable increase in low-latitude countries. We observed a negative correlation between SDI and EAPC in ASMR ( r s = -0.57, P < 0.01) and ASDR ( r s = -0.59, P < 0.01) among 204 countries.@*CONCLUSION@#Heat-attributable CVD burden substantially increased in most developing countries and tropical regions.

Design and development of a novel infrared mild moxibustion device / 中国针灸

To make up for the shortcomings of traditional mild moxibustion, according to the principle and technical operation characteristics of traditional mild moxibustion, combined with temperature control technology, a novel infrared mild moxibustion device is developed, which is capable of real-time accurate temperature control. This novel infrares mild moxibustion device is composed of a host computer and an infrared radiation head. The host computer includes four modules: power supply, human-computer interaction interface, micro control unit (MCU) and drive circuit. The infrared radiation head mainly includes an infrared heater and a temperature sensor. This novel infrared mild moxibustion device is easy to operate. The electrothermal heating tablet can generate infrared radiation of 3 000-13 000 nm. After the temperature of the infrared heater is stabilized, the range of temperature change is ±0.50 ℃, realizing the goal of precise temperature control. In addition, it can operate moxibustion treatment at multiple acupoints at the same time, which is conducive to the dose-effect evaluation of mild moxibustion.

Research progress of target temperature management on protective mechanism of cardiac function after cardiac arrest / 中华危重病急救医学

Targeted temperature management (TTM) has been partially applied in patients with restoration of spontaneous circulation (ROSC) after cardiac arrest (CA). In the 2020 American Heart Association (AHA) cardiopulmonary resuscitation (CPR) guidelines, TTM is used as advanced life support after ROSC for the treatment of patients with CPR. TTM has a protective effect on cardiac function after CA, but the specific mechanism of its protective effect on cardiac function remains unclear. In this paper, the basic experimental progress, clinical trial progress and development prospect of TTM on the protective mechanism of cardiac function after CA are reviewed.

Study on the sterilization effect of plasma jet and plasma activated water on Streptococcus mutans / 生物医学工程学杂志

To explore the effects of plasma jet (PJ) and plasma activated water (PAW) on the sterilization of Streptococcus mutans ( S. mutans) and compare the advantages and disadvantages of the two methods, so as to provide a basis for plasma treatment of dental caries and to enrich the treatment means of dental caries, an atmospheric pressure plasma excitation system was built, and the effects of PJ and PAW on the sterilization rate of S. mutans and the changes of temperature and pH during treatment were studied under different excitation voltage ( U e ) and different excitation time ( t e ). The results showed that in the PJ treatment, the difference in the survival rate of S. mutans between the treatment group and the control group was statistically significant ( P = 0.007, d=2.66) when U e = 7 kV and t e = 60 s, and complete sterilization was achieved at U e = 8 kV and t e = 120 s in the PJ treatment. In contrast, in the PAW treatment, the difference in the survival rate of S. mutans between the treatment group and the control group was statistically significant ( P = 0.029, d = 1.71) when U e = 7 kV and t e = 30 s, and complete sterilization was achieved with PAW treatment when U e = 9 kV and t e = 60 s. Results of the monitoring of temperature and pH showed that the maximum temperature rise during PJ and PAW treatment did not exceed 4.3 °C, while the pH value after PAW treatment would drop to a minimum of 3.02. In summary, the optimal sterilization parameters for PJ were U e =8 kV and 90 s < t e ≤ 120 s, while the optimal sterilization parameters for PAW were U e = 9 kV and 30 s< t e ≤ 60 s. Both treatment methods achieved non-thermal sterilization of S. mutans, where PJ required only a smaller U e to achieve complete sterilization, while at pH < 4.7, PAW only required a shorter t e to achieve complete sterilization, but its acidic environment could cause some chemical damage to the teeth. This study can provide some reference value for plasma treatment of dental caries.

Genome-wide identification of the banana GLR gene family and its expression analysis in response to low temperature and abscisic acid/methyl jasmonate / 生物工程学报

Glutamate receptor-like (GLR) is an important class of Ca2+ channel proteins, playing important roles in plant growth and development as well as in response to biotic and abiotic stresses. In this paper, we performed genome-wide identification of banana GLR gene family based on banana genomic data. Moreover, we analyzed the basic physicochemical properties, gene structure, conserved motifs, promoter cis-acting elements, evolutionary relationships, and used real-time fluorescence quantitative polymerase chain reaction (RT-qPCR) to verify the expression patterns of some GLR family members under low temperature of 4 ℃ and different hormone treatments. The results showed that there were 19 MaGLR family members in Musa acuminata, 16 MbGLR family members in Musa balbisiana and 14 MiGLR family members in Musa itinerans. Most of the members were stable proteins and had signal peptides, all of them had 3-6 transmembrane structures. Prediction of subcellular localization indicated that all of them were localized on the plasma membrane and irregularly distributed on the chromosome. Phylogenetic analysis revealed that banana GLRs could be divided into 3 subclades. The results of promoter cis-acting elements and transcription factor binding site prediction showed that there were multiple hormone- and stress-related response elements and 18 TFBS in banana GLR. RT-qPCR analysis showed that MaGLR1.1 and MaGLR3.5 responded positively to low temperature stress and were significantly expressed in abscisic acid/methyl jasmonate treatments. In conclusion, the results of this study suggest that GLR, a highly conserved family of ion channels, may play an important role in the growth and development process and stress resistance of banana.

Distribution, abundance and seasonality of scale insects in sugarcane crops in the state of São Paulo / Distribuição, abundância e sazonalidade de cochonilhas em culturas de cana-de-açúcar no estado de São Paulo

Abstract In the state of São Paulo, the main sugarcane producing region of the world, two species of scale insects have frequently occurred, Aclerda takahashii (Kuwana, 1932) (Hemiptera: Aclerdidae) and Saccharicoccus sacchari (Cockerell, 1895) (Hemiptera: Pseudococcidae). To map the distribution and abundance of these species, 17 sugarcane producing fields, distributed in six mesoregions in São Paulo, were evaluated in August 2017 and, January, February, June and July 2018 during the ripening phase. The study on the seasonality of these species, by the presence or absence of the scale insects during the phenological cycle of the plant, was conducted between August 2017 and July 2018 in two sugarcane producing fields in the municipality of Jaboticabal, São Paulo, Brazil. The presence of S. sacchari was found in all the analyzed locations, and A. takahashii in twelve. Both scale insects showed significant difference of infestation in the node's region of the stems during the ripening phase in one of the studied locations. The aclerdid presented significant difference by infestation in one site during the ripening phase of the plant. The pseudococcid infested a greater number of nodes in the following phases of development; vegetative, grand growth and ripening in both studied areas, but it was in one site during the ripening phase that presented the greatest difference. Although the pink sugarcane mealybug was more abundant than A. takahashii in both studies, there were no patterns of relationships between the numbers of individuals to geographical locations and temperature.

Resumo No estado de São Paulo, principal região produtora de cana-de-açúcar do mundo, duas espécies de cochonilhas têm ocorrido frequentemente, Aclerda takahashii (Kuwana, 1932) (Hemiptera: Aclerdidae) e Saccharicoccus sacchari (Cockerell, 1895) (Hemiptera: Pseudococcidae). Para mapear a distribuição e abundância destas espécies, 17 regiões produtoras de cana-de-açúcar, distribuídas em seis mesorregiões de São Paulo, foram avaliadas em agosto de 2017 e janeiro, fevereiro, junho e julho de 2018, durante a fase de maturação. O estudo da sazonalidade destas espécies, pela presença ou ausência das cochonilhas durante o ciclo fenológico da planta, foi conduzido entre agosto de 2017 e julho de 2018 em duas regiões produtoras de cana-de-açúcar no município de Jaboticabal, São Paulo, Brasil. Saccharicoccus sacchari foi encontrada em todas as localidades analisadas, e A. takahashii em 12. Ambas cochonilhas mostraram diferença significativa de infestação na região dos nós dos colmos durante a fase de maturação em uma das localidades estudadas. O aclerdídeo apresentou diferença significativa pela infestação em uma localidade durante a fase de maturação da planta. O pseudococcídeo infestou um grande número de nós nas seguintes fases de desenvolvimento; perfilhamento, crescimento vegetativo e maturação em ambas áreas estudadas, mas foi em uma localidade durante a fase de maturação que apresentou a maior diferença. Embora a cochonilha rosada da cana-de-açúcar foi mais abundante do que A. takahashii em ambos estudos, não houve padrões de relações entre o número de indivíduos com a localização geográfica e temperatura.

Physiological and biochemical changes induced by Qiangdi nano-863 biological assistant growth apparatus during rice seed priming under temperature stress / Alterações fisiológicas e bioquímicas induzidas pelo aparelho de crescimento assistente biológico Qiangdi nano-863 durante o priming de sementes de arroz sob estresse de temperatura

Abstract A huge amount of rice cultivation and consumption occur in Asia particularly in Pakistan and China. However, multiple abiotic stresses especially high and low-temperature proved to be a substantial threat for rice production ultimately risks for food security. To overcome various types of abiotic stress; seed priming is among the effective approaches to improve the rice seed germination and growth vigor. Therefore, the present study was planned to evaluate physiological and biochemical modifications in Chinese and Pakistani rice varieties by Qiangdi 863 biological assistant growth apparatus nano treated water (NTW), Osmopriming Calcium chloride (CaCl2), redox priming hydrogen peroxide (H2O2) and hormonal priming by Salicylic acid (SA) under temperature stress conditions. The experiment was performed with completely randomize design conditions. Five rice varieties, nomenclature as Zhongzoa 39, (Chinese rice variety) KSK 133, KS 282, Super basmati and PK 1121 aromatic (Pakistani rice variety) were sown under low temperature (LT) (17ºC), optimal temperature (OT) 27ºC and high temperature (HT) 37ºC conditions. The present study indicated that nanopriming were the most effective treatments increased Germination Energy Percentage (GEP) (96.1, 100, 100%), Speed of Germination (SG) (27.2, 35.45, 37.1), Final Germination Percentage (FGP) (98.2, 99.1, 99.4%), Seedling Dry Weight Biomass (DWB) (0.1, 0.137, 0.14g), Total Chlorophyll Content (0.502, 13.74, 15.21), antioxidant enzymes Superoxide Dismutase (SOD)(3145, 2559, 3345 µg-1FWh-1), Catalase (CAT) (300, 366, 3243 µg-1FWh-1) and decreased Malondialdehyde (MDA) (6.5, 12.2, 6.5 µmol g-1 FW) for Zhongzao 39 and KSK 133 rice varieties under low (LT+NTW), optimal temperature (OP+NTW) and high temperature (HT+NTW) stress., Therefore, nano-priming is recommended to cope with the high and low-temperature stress conditions along with improved productivity of rice.

Resumo Cultivo e consumo de arroz ocorrem em grandes quantidades na Ásia, particularmente no Paquistão e na China. No entanto, vários estresses abióticos, especialmente de alta e baixa temperatura, provaram ser uma ameaça considerável para a produção de arroz, em última análise, riscos para a segurança alimentar. Para superar vários tipos de estresse abiótico, o priming de sementes está entre as abordagens eficazes que melhoram a germinação e o vigor de crescimento das sementes de arroz. Portanto, o presente estudo foi planejado para avaliar as modificações fisiológicas e bioquímicas em variedades de arroz chinês e paquistanês por Qiangdi 863, aparelho assistente biológico de crescimento com água nanotratada (NTW), Osmopriming cloreto de cálcio (CaCl2), peróxido de hidrogênio redox (H2O2) e priming hormonal por ácido salicílico (SA) em condições de estresse de temperatura. O experimento foi realizado em condições de delineamento inteiramente ao acaso. Cinco variedades de arroz, nomenclaturas como Zhongzoa 39 (variedade de arroz chinês), KSK 133, KS 282, Super basmati e PK 1121 aromático (variedade de arroz do Paquistão) foram semeadas sob baixa temperatura (LT) (17 ºC), temperatura ótima (OT) 27 ºC e condições de alta temperatura (HT) 37 ºC. O presente estudo indicou que nanocondicionamento foi o tratamento mais eficaz: aumento da porcentagem de energia de germinação (GEP) (96,1%, 100%, 100%), velocidade de germinação (SG) (27,2, 35,45, 37,1), porcentagem de germinação final (FGP) (98,2%, 99,1%, 99,4%), biomassa de peso seco de mudas (DWB) (0,1 g, 0,137 g, 0,14 g), conteúdo total de clorofila (0,502, 13,74, 15,21), enzimas antioxidantes superóxido dismutase (SOD) (3145, 2559, 3345 µg-1FWh- 1), catalase (CAT) (300, 366, 3243 µg-1FWh-1) e malondialdeído diminuído (MDA) (6,5, 12,2, 6,5 µmol g-1 FW) para as variedades de arroz Zhongzao 39 e KSK 133 sob baixo (LT + NTW), temperatura ótima (OP + NTW) e estresse de alta temperatura (HT + NTW). Portanto, o nanopriming é recomendado para lidar com as condições de estresse de alta e baixa temperatura, juntamente com a produtividade aprimorada do arroz.

Modulating the production of xylanase by Bacillus pumilus BS131 through optimization using waste fiber sludge / Modulando a produção de xilanase por Bacillus pumilus BS131 por meio da otimização usando lodo de fibra residual

Abstract In recent days, cheapest alternative carbon source for fermentation purpose is desirable to minimize production cost. Xylanases have become attractive enzymes as their potential in bio-bleaching of pulp and paper industry. The objective of the present study was to identify the potential ability on the xylanase production by locally isolated Bacillus pumilus BS131 by using waste fiber sludge and wheat bran media under submerged fermentation. Culture growth conditions were optimized to obtain significant amount of xylanase. Maximum xylanase production was recorded after 72 hours of incubation at 30 °C and 7 pH with 4.0% substrate concentration. In the nutshell, the production of xylanase using inexpensive waste fiber sludge and wheat-bran as an alternative in place of expensive xylan substrate was more cost effective and environment friendly.

Resumo Nos últimos dias, a fonte alternativa de carbono mais barata para fins de fermentação é desejável para minimizar o custo de produção. As xilanases têm se tornado enzimas atraentes como seu potencial no biobranqueamento da indústria de papel e celulose. O objetivo do presente estudo foi identificar a capacidade potencial na produção de xilanase por Bacillus pumilus BS131 isolado localmente usando lodo de fibra residual e farelo de trigo em meio de fermentação submersa. As condições de crescimento da cultura foram otimizadas para obter uma quantidade significativa de xilanase. A produção máxima de xilanase foi registrada após 72 horas de incubação a 30 °C e pH 7 com concentração de substrato de 4,0%. Resumindo, a produção de xilanase usando lodo de fibra residual de baixo custo e farelo de trigo como uma alternativa no lugar do substrato de xilano caro foi mais econômica e ecológica.

Immobilization of mutated xylanase from Neocallimastix patriciarum in E. coli and application for kraft pulp biobleaching / Imobilização de xilanase mutada de Neocallimastix patriciarum em E. coli e aplicação para polpa kraft

Abstract As an important enzyme, xylanase is widely used in the food, pulp, and textile industry. Different applications of xylanase warrant specific conditions including temperature and pH. This study aimed to carry out sodium alginate beads as carrier to immobilize previous reported mutated xylanase from Neocallimastix patriciarum which expressed in E. coli, the activity of immobilization of mutated xylanase was elevated about 4% at pH 6 and 13% at 62 °C. Moreover, the immobilized mutated xylanase retained a greater proportion of its activity than the wide type in thermostability. These properties suggested that the immobilization of mutated xylanase has potential to apply in biobleaching industry.

Resumo Como importante enzima, a xilanase é amplamente utilizada na indústria alimentícia, de celulose e têxtil. Diferentes aplicações de xilanase garantem condições específicas, incluindo temperatura e pH. Este estudo teve como objetivo realizar grânulos de alginato de sódio como carreador para imobilizar xilanase mutada relatada anteriormente de Neocallimastix patriciarum que expressa em E. coli, a atividade de imobilização da xilanase mutada foi elevada em cerca de 4% em pH 6 e 13% a 62 °C. Além disso, a xilanase mutada imobilizada reteve uma proporção maior de sua atividade do que o tipo amplo em termoestabilidade. Essas propriedades sugerem que a imobilização da xilanase mutada tem potencial para aplicação na indústria de biobranqueamento.